Specials
Equipment Online
Wheel Balancers
Brake Lathes
Flywheel Grinders
Lifts
MotorVac Products Model HB 10
Tire Changers
Wheel Balancers
Parts Online
Brake Lathe Breakdowns and Parts
Brake Lathe Breakdowns and Parts
Tire Changer Breakdowns and Parts
Wheel Balancers Breakdowns and Parts
Used & Rebuilt Equipment
Internet Specials
HEAVY DUTY
AC MACHINES
MOTORCYCLES
HUNTER
PRO AIR SYSTEM
RTI
PIPE BENDERS
AVAILABLE FOR IMMEDIATE SHIPMENT
The HB-10 Bender is Huth's entry level bender, designed to introduce you to Huth quality while showing you the incredible profit potential.

HB-10 can bend up to 3" tubing and includes a built-in swager/expander for complete end-finishing.

The HB-10 is available in 220 volt, single or 3 phase, 60 or 50 Hz.

* The HB-10 package includes:
5530 5" Radius Die 3"
5412 5" Radius Die 2-1/2"
5414 5" Radius Die 2-1/4"
5200 5" Radius Die 2"
4414 4" Radius Die 2-1/4"
4200 4" Radius Die 2"
3134 3" Radius Die 1-3/4"
3112 3" Radius Die 1-1/2"
1350 Full Back Shoes 3" (2)
4412 Full Back Shoes 2-1/2" (2)
4211 Full Back Shoes 2-1/4" (2)
1200 Full Back Shoes 2" (2)
1134 Full Back Shoes 1-3/4" (2)
1112 Full Back Shoes 1-1/2" (2)
4410 Half Shoe 2-1/2"
4416 Half Shoe 2-1/4"
1045 Half Shoe 2"
1040 Half Shoe 1-3/4"
1038 Half Shoe 1-1/2"
1750 Collet 2-1/2"
1725 Collet 2-1/4"
1720 Collet 2"
1734 Collet 1-3/4"
1712 Collet 1-1/2"

853 Flare Tool
557 Domer Die 1-3/4" - 2-1/2"
558 Domer Die 2-5/8" - 2-3/4"
555 Female Ball Die 1-3/4" - 2"
556 Female Ball Die 2-1/4" - 2-1/2"
550 Male Ball Die 1-3/4" : Swage 2"
552 Male Ball Die 2" : Swage 2-1/4"
553 Male Ball Die 2-1/4" : Swage 2-1/2"
554 Male Ball Die 2-1/2" : Swage 2-3/4"
112 Swage Die 1-1/2"
134 Swage Die 1-3/4"
508 Arbor
498 Arbor Tip
499 Arbor Tip
473 Segment 1-3/8" - 1-3/4"
474 Segment 1-3/4" - 2-1/8"
475 Segment 2-1/8" - 2-1/2"
476 Segment 2-1/2" - 3"
97050 Die Spring
870 O-Ring Kit
815 Die Holder (853)
816 Die Holding Pin
855 Die Pins (Qty. 30)
1079 Full Shoe Spacers (2)
1080 Half Shoe Spacer
97305 Huth Instructional DVD


* HB-10 package comes as listed only. Additional tooling available at extra charge.
Model 1600

The Model 1600 Knee Control Bender is Huth's entry level bender. The rugged, versatile 1600 is the same bender as in the HB-10 package. But it comes without the tooling, making it ideal for those who want to put together their own tooling packages or who already have tooling but want to replace or add a bender.

The 1600 delivers 58,000 lbs. of bending power - more than enough for 3" tubing. Bending is activated by a slim-design knee control pedal, allowing the operator to get close to the work for more precision. A foot pedal can be substituted for the knee pedal, if desired, at no charge. For a nominal charge, Huth will install a foot pedal and a knee pedal.

A manual depth-of-bend indicator clearly shows the operator how far into a bend he is at all times.

As with all Huth Benders, the 1600 features a built-in swager/expander for complete end-finishing - 1" to 3" tubing on the swager end and 1" to 5 1/2" tubing on the expander end. Ball joints, flanges, flares and slip joints are easily created. Huth's Accu-Sizer(tm) automatic bull's-eye expanding systems lets you dial in precise expansions every time.

The 1600 accepts all of Huth's standard tooling and accessories such as the Ready-Rak, Rod Bracket Bender and Oil Filter Crusher.

Easy-To-Use Knee Pad Control

Manual Depth-of-Bend Indicator

Includes Huth Instructional Video

Available with Foot Pedal Activation

Complete Manual Control

Built-in swager/expander for complete end-finishing

58,000 lbs of bending power - More than enough for 3" tubing

HB Cylinders

Flat Tool Tray

Bending Die Retainer

Heavy-Duty Swager/Expander

Rugged I-Beam Construction

Exclusive Safety-Guard Package

Front Swivel Casters with Brakes

The 1600 is available with 220 volt, single or 3 phase, 60 or 50 Hz., high speed, and high volt options.
Model 2806

MODEL 2806

Model 2806 is designed for high volume shops that need quick, precise, bending and end finishing.

The 2806 offers the convenience of a knee pedal control and a reduced size control panel. This allows the operator to get closer to the work area for more precision and less fatigue.

The Smart Automatic Mode features an adjustable return-to–home position control. This unique, timesaving feature increases efficiency by assuring fast and easy transitions between multiple bends.

Model 2806 comes with a 5 horse power motor and provides 58,000 LBS of bending force. An optional 7 ½ horse power motor is available for 25% faster bending.

In the automatic mode, the automatic depth-of-bend selector ensures precise bending control through the use of an easy-to-read, easy-to-adjust depth of bend plate.

The heavy duty swager/expander gives you complete end finishing capabilities. The swager end accommodates 1” to 3” tubing. The expander end allows for expansions from 1” to 5 ½”. With Huth’s Accu-Sizer bull’s-eye expanding system, you can dial in precise expansions every time.

Features

* Easy-to–use manual knee pedal control
* Push button control
* Automatic Depth-Of-Bend selector
* 58,000 LBS of bending force. Enough for 3” tubing
* Agricultural main cylinder
* Flat tool tray
* Bending die retainer
* Heavy duty Swager/Expander
* Rugged I-Beam construction
* Exclusive safety guard package
* Front swivel casters with brakes
* 220 volt, 60HZ operation
   Single phase requires 30 amp service
   Three phase requires 20 amp service
   (Other voltages and 50HZ available)
Model 2008

MODEL 2008

Model 2008 is designed for high volume shops that need quick, precise, bending and end finishing.

The 2008 offers the convenience of a knee pedal control and a reduced size control panel. This allows the operator to get closer to the work area for more precision and less fatigue.

The Smart Automatic Mode features an adjustable return-to–home position control. This unique, timesaving feature increases efficiency by assuring fast and easy transitions between multiple bends.

Model 2008 comes with a 5 horse power motor and provides 58,000 LBS of bending force. An optional 7 ½ horse power motor is available for 25% faster bending.

In the automatic mode, the automatic depth-of-bend selector ensures precise bending control through the use of an easy-to-read, easy-to-adjust depth of bend plate.

The heavy duty swager/expander gives you complete end finishing capabilities. The swager end accommodates 1” to 3” tubing. The expander end allows for expansions from 1” to 5 ½”. With Huth’s Accu-Sizer bull’s-eye expanding system, you can dial in precise expansions every time.

Features

* Easy-to–use manual knee pedal control
* Push button control
* Automatic Depth-Of-Bend selector
* Auxiliary on/off switch
* 58,000 LBS of bending force. Enough for 3” tubing
* Industrial main cylinder
* Swager tray
* Deluxe tool tray
* Bending die retainer
* Heavy duty Swager/Expander
* Rugged I-Beam construction
* Exclusive safety guard package
* Front swivel casters with brakes
* 220 volt, 60HZ operation
   Single phase requires 30 amp service
   Three phase requires 20 amp service
   (Other voltages and 50HZ available)
Heavy Duty Bender (2600)

HEAVY DUTY BENDER

MODEL 2600


The 2600 is designed for production work and bending heavier materials up to 3” OD. It meets the standards set by our other models for precise bending and end finishing.

The 2600 provides 85,000 lbs. of bending force in comparison to 58,000 lbs. produced by our other models. It comes standard with a 7-1/2 HP motor. A 3” tube bent to 90-degree in the automatic mode can be completed in 16 seconds.

The ergonomically designed knee control allows the operator hands-free control for quick tube location and securing of the tube. It is also invaluable for prototyping.

The smart automatic mode features an adjustable return-to-home position control. This unique, time saving feature increases efficiency by assuring fast and easy transitions between multiple bends. The automatic depth-of-bend selector ensures precise bending control through the use of an easy-to-read, easy-to-adjust depth-of-bend plate. This feature assures accuracy and repeatability.

The swager/expander gives you complete end-finishing capabilities. The swager end accommodates 1” to 3” tubing. The expander end allows for expansions from 1” to 5-1/2”. With Huth’s Accu-Sizer bulls-eye expanding system, you can dial in precise expansions every time.

FEATURES

* 85,000 lbs of bending force
* Reinforced bending gates and frame
* Large volume reservoir
* Elevated center of bend
* 7-1/2 HP motor
* Heavy-duty swager/expander
* Push button controls
* Easy-to-use knee control for
   forward/reverse
* Automatic depth-of-bend selector

* Bending die retainer
* Rugged I-Beam construction
* Exclusive safety guard package
* Front swivel caster with brakes
* 220 volt, 60-hz operation
          - Single-phase requires
                    50-amp service
          - Three-phase requires
                    30-amp service
          - Other voltages and 50-hz
             available 

* Available without swager/expander – Model 2601
Misc. Huth Equipment
BEND FRAME STRUCTURES OUT OF SQUARE TUBING

With HUTH'S square and custom bending dies, you can easily create frames for

Buildings, Car Ports, Canopies, Go Carts, Trailers.......

  • H1000   Back Shoes 3/4" - 1-1/2" (2 Req'd)
  • H3334   Bend Die 3/4" (3" Radius)
  • H4334   Bend Die 3/4" (4" Radius)
  • H3310   Bend Die 1" (4" Radius)
  • H4310   Bend Die 1" (5" Radius)
  • H4314   Bend Die 1-1/4" (4" Radius)
  • H5314   Bend Die 1-1/4" (5" Radius)
  • H5312   Bend Die 1-1/2" (5" Radius)
  • H1020   Back Shoes 2" (2 Req'd)
  • H1025   Back Shoes 2-1/4" (2 Req'd)
  • H1054   Back Shoes 2-1/2" (2 Req'd)
  • H5320   Bend Die 2" (5" Radius)
  • H5325   Bend Die 2-1/4" (5" Radius)
  • H5350   Bend Die 2-1/2" (5" Radius)
Huth's History
Before Gerry Huth developed the first automotive pipe bender in the 1950s, fitting exhaust pipes was a difficult job that was beyond the means of many shops. Mechanics had to cut and weld pipe sections, making small bends manually. By 1958, Huth had developed the first prototype of the portable pipe bender. Soon, Huth was supplying benders to shops across the country. Huth Benders continue to lead the field more than 40 years later due to ongoing research and development, and strong commitment to quality and a responsiveness to the needs of a changing industry.

Tube & Pipe Bending
The value of portable, affordable tube and pipe benders was quickly evident when Huth first introduced them. With the increased number and variety of cars on the road in the last 40 years, that need has increased. With a Huth bender, it's not necessary to keep a variety of pre-bent pipes in inventory. With a few sizes of straight tubing on hand, you can quickly bend pipes for thousands of applications. You increase your profit margin and your customers don't have to wait for pre-bent pipes to be delivered.

Over the years, the value of a Huth bender has been realized for many other applications. Each year more and more Huth benders are supplied to businesses from small fabrication shops to full scale manufacturing. The number of products they are used for vary from athletic equipment to fire systems to building frames to motor cycle and ATV parts to railing systems to satellite dish arms – their applications are ENDLESS!

Huth Benders
Although some fundamental, time-tested concepts were retained, ongoing research and development has allowed Huth to improve and refine their line of benders. Today Huth offers 5 tube and pipe benders, as well as numerous accessories, such as portable expanders, swager/expanders, oil filter crushers and a wide variety of tooling and tooling packages
Vertical bender

Huth is introducing a new vertical bender which features:

  • Programmable Automatic Bending allows you to store multiple programs of 8 bends each.
  • Electronic depth-of-bend encoder for precise bending.
  • Complete manual control for free design work, featuring a fine jog mode for precise setups.
  • Custom-made tooling available to fit your needs.
  • Bends up to 3" round and 1-1/2" square tubing as well as various diameters of schedule 40 pipe and solid bar stock.
  • Compact 40" x 40" foot print.
  • Powerful 7-1/2 HP power unit.
  • 58,000 lbs. of compression power.

Now Available - Call for Details