










Ben Pearson Pipe Benders and Oil FIlter Crushers 












Model BP 79 



Model MC 59 



Model MB 97 




Pipe Bender Manuals and Parts 
Op Manuals 
Parts 



BP 79 





MB 97 





MC 59 





MC 59 HS 















































Ben Pearson pipe benders are the standard that every other muffler shop bender in the industry is compared to. You hear the term “Cadillac of the industry” frequently when people speak of the Pearson benders but even that doesn’t do it justice. 






Crushmaster 1 

Crushmaster 2 



The difference between Ben Pearson and the rest is the “back up service”. Quite simply, no one does it better. You are always just a phone call away from expert advise and courteous help.











See how your exhaust system really works 







WE NOW HANDLE HUTH PIPE BENDERS CALL FOR DETAILS 



Ben Pearson has put its 50 years of automotive experience into the design and development of the CrushMaster oil filter crushing system.




The CrushMaster 2 is built tough, for years of troublefree operation. Made of solid steel plate construction, the CrushMaster 2 oil filter crushing system is designed for heavyduty use, and will accommodate both standard size filters and heavyduty truck filters up to 16" in height.
Builtin operator convenience and safety features include convenient waste oil drain connections, easily located on/off switch for safe operation, and heavyduty 2hp motor delivering 37,500 pounds of crushing force. The optional stand, which accommodates both CrushMaster models, is built to withstand years of punishment and is designed with a heavyduty grated top for draining of filters before crushing. The CrushMaster 2 from Ben Pearson, it's a heavyduty oil filter crusher built to perform.




The CrushMaster 1 oil filter crusher operates on normal shop air, delivers 13,572 lbs. of crushing force at 120 PSI, accommodates all standard oil filters and was designed for highvolume use.
Solid steel plate construction and builtin safety features assure years of safe, maintenance free operation.
If you're looking for an oil filter crusher that will hold up over years of heavyduty work, check out the CrushMaster 1 oil filter crusher from Ben Pearson. It's built tough. It's built to last.




CrushMaster 1 Dimensions & Specifications

Height:

27 inches 
Width:

13 ¾ inches 
Depth:

18 inches 
Weight:

255 lbs. 
Crushing Chamber height:

9 inches 
Crushing Chamber width:

8 inches 
Crushing Chamber depth:

8 inches 
Air inlet:

¼" NPT female 
Air Pressure required:

100  180 PSI 
Catch basin connection:

¾" NPT female 
Height on tube stand:

68 inches 
Height on deluxe stand:

71 inches 
Floor space for tube stand:

29"wide x 225/8"deep 
Floor space for deluxe stand:

30"wide x 26"deep 
Cycle Time:

1120 seconds 



CrushMaster 2 Dimensions & Specifications

Height:

41 ½ inches 
Width:

25 inches 
Depth:

27 inches 
Weight:

400 lbs. 
Crushing Chamber height:

16 inches 
Crushing Chamber width:

9 ¼ inches 
Crushing Chamber depth:

9 ¼ inches 
Electric power required:

208230V single phase 
Catch basin connection:

1 ½" NPT female 
Height on deluxe stand:

83 ½ inches 
Floor space for deluxe stand:

30"wide x 26"deep 
Cycle Time:

12 seconds 





Ben Pearson
Delivers The Complete Bender Package
At Ben Pearson we have one basic philosophy—to design and build the finest muffler shop pipe bending equipment available on the market. It's with this attitude, this basic philosophy, that we approach every pipe bender we build.
It's a total commitment to followthrough. From initial product design, through rigorous quality control standards, to finished product. It's what keeps us ahead of the competition, and it's what continues to make us the clear leader in the exhaust industry.






We've Set The Standard For The Industry To Follow
When we designed and built our first machine we built in many special operator convenience features, special features which were at the time industry "firsts." It's these special features that separate us from competitive models. But features alone don't make the product. It takes much more. At Ben Pearson we go well beyond product manufacturing, we also offer the industry's best service support, training and product guarantee. It's your assurance that when you invest in a Pearson pipe bender you're getting a rock solid, American made product that will give you a full day's work for many years to come.


Ben Pearson Offers Features That Continue To Lead By Design
Other manufacturers can design and build a pipe bender, but it takes a company with a strong understanding of the marketplace to deliver a machine that offers, not just the features you need, but also the features you want. Our line of pipe bending machines deliver.
Take a close look at the features we build into each Ben Pearson bender. But also look closely at the detail we build into each machine. You won't find quality being sacrificed at any level of production.



Features & Benefits
180° Bend On A 5" Radius
Try this with another pipe bender and the results may not be what you expect. With a Ben Pearson bender you'll get a perfect 180° bend on a 5" radius (our 3" and 4" ram dies also make perfect bends possible, even at maximum bend). What you won't get is a pipe that is crimped or collapsed. The reason for this is simple—Ben Pearson's unique die construction eliminates the problem of the pipe locking on the die. It may seem like a small feature, but if you're the operator of a pipe bender, it's an extra feature you'll appreciate.



QuickChange Bending Dies
Operator convenience is the name of the game in the exhaust industry. The quicker the job, the more profit you can make. At Ben Pearson we know this, and that's why we designed our quickchange dies for maximum speed and versatility. You won't find any bolts, pins or cumbersome pusher blocks. It's quick and easy with Ben Pearson



3" Bending And Expanding Capability
With today's changing marketplace every exhaust professional has to have 3" capability. That's why Ben Pearson offers a full range of 3" bending dies and expanders. We even offer 3'A" and 4" expanders. Hey, if you've got a tough job to do, we'll help you get it done by delivering the tools and equipment you need to get the job done right. It's called being a leader and we do it better than anyone.



Longer Stroke Main Cylinder
We've added an extra 3" stroke to the main cylinder of our bender. This unique operator convenience feature gives you an extra 6" of space between the edge of the ramdie and the edges of the back shoes. You have more room to feed the pipe through the machine. There's no need for pusher blocks which can become cumbersome and time consuming when changing your die. Ben Pearson developed the longer stroke main cylinder for added operator convenience.



Automatic Motor CutOff
Saves operator time, reduces wear on the electrical and hydraulic system and minimizes electrical costs.



NEW SUPER 110 PACKAGE 



SUPER 80 PACKAGE 


SUPER 120 PACKAGE 



TS 3 PACKAGE 

TD 3 PACKAGE 




















SUPER 150 PACKAGE THE MAX OF ALL PACKAGES 



DATAMASTER 

VIDEO TRAINING 













Ben Pearson Delivers The Total Package
That's what you get when you invest in a Ben Pearson bender...the total package you need to get the job done right. Americanmade technology. The best warranty in the business. Unique operator convenience features that make your job easier and faster. You get all of this plus a support network that is totally responsive to your needs. These are the reasons you should consider Ben Pearson. These are the reasons why Ben Pearson continues to Lead By Design.



We Back Our Products With Service After The Sale And
A Rock Solid Warranty
At Ben Pearson we don't sell you a piece of equipment and then forget you. When you buy a Pearson bender you're getting a team of support personnel that are totally responsive to your needs and problems. It's called a total commitment to followthrough, and nobody does it better than Ben Pearson. We demand it from our people—our customers expect it from us.



Ben Pearson Provides A Lifetime Limited Warranty
We don't have to offer as complete a warranty as we do, many of our competitors don't. Our limited lifetime warranty shows the commitment we have to our products' reliability and the commitment we have to our customers




We Offer InDepth Training
For operators who are new to the exhaust service business, Ben Pearson offers extensive training courses on the utilization of our line of muffler shop pipe benders. The course includes training in all phases of bending and machine maintenance. Ben Pearson also offers a complete video training tape that walks the user through every step of the bending process.




SUPER150 DIE PACKAGE
 Deluxe program cards
 Rotational Dial
 Bending Radius Dies Pipe Diameter 11/2" Bend Radius 3"
 Bending Radius Dies Pipe Diameter 11/2" Bend Radius 4"
 Bending Radius Dies Pipe Diameter 13/4" Bend Radius 3"
 Bending Radius Dies Pipe Diameter 13/4" Bend Radius 4"
 Bending Radius Dies Pipe Diameter 17/8" Bend Radius 3"
 Bending Radius Dies Pipe Diameter 17/8" Bend Radius 4"
 Bending Radius Dies Pipe Diameter 17/8" Bend Radius 5"
 Bending Radius Dies Pipe Diameter 2" Bend Radius 3"
 Bending Radius Dies Pipe Diameter 2" Bend Radius 4"
 Bending Radius Dies Pipe Diameter 2" Bend Radius 5"
 Bending Radius Dies Pipe Diameter 21/4" Bend Radius 3"
 Bending Radius Dies Pipe Diameter 21/4" Bend Radius 4"
 Bending Radius Dies Pipe Diameter 21/4" Bend Radius 5"
 Bending Radius Dies Pipe Diameter 21/2" Bend Radius 4"
 Bending Radius Dies Pipe Diameter 21/2" Bend Radius 5"
 Bending Dies, Back Shoes (2) Pipe Diameter 11/2" Bend Radius 2"
 Bending Dies, Back Shoes (2) Pipe Diameter 13/4" Bend Radius 21/4"
 Bending Dies, Back Shoes (2) Pipe Diameter 17/8" Bend Radius 21/2"
 Bending Dies, Half Shoes Pipe Diameter 11/2" Bend Radius 2"
 Bending Dies, Half Shoes Pipe Diameter 13/4" Bend Radius 21/4"
 Bending Dies, Half Shoes Pipe Diameter 17/8" Bend Radius 21/2"
 Bending Dies, Three Quarter Shoes Pipe Diameter 2" Bend Radius 21/4"
 EndFinishing Tools (Segmented), Expanders 11/2" to 15/8"
 EndFinishing Tools (Segmented), Expanders 13/4" to 2"
 EndFinishing Tools (Segmented), Buick Ball Tools 2"
 EndFinishing Tools (Segmented), Buick Ball Tools 21/2"
 EndFinishing Tools (Segmented), Buick Ball Tools 21/4"
 EndFinishing Tools (Segmented), Flares 45 degree 13/4" and 21/4"
 EndFinishing Tools (Segmented), Flares 45 degree 17/8" and 23/8"
 EndFinishing Tools (Segmented), Flares 45 degree 2" and 21/2"
 EndFinishing Tools (Solid), Collets (2 required) Pipe Diameter 11/2" Bend Radius 2"
 EndFinishing Tools (Solid), Collets (2 required) Pipe Diameter 13/4" Bend Radius 21/4"
 EndFinishing Tools (Solid), Collets (2 required) Pipe Diameter 17/8" Bend Radius 21/2"
 EndFinishing Tools (Solid), Swagers Pipe Diameter 11/2" Bend Radius 2"
 EndFinishing Tools (Solid), Swagers Pipe Diameter 13/4" Bend Radius 21/4"
 EndFinishing Tools (Solid), Swagers Pipe Diameter 17/8" Bend Radius 21/2"
 EndFinishing Tools (Solid), Female Ball Joint 13/4" and 2"
 EndFinishing Tools (Solid), Female Ball Joint 21/4" and 21/2"
 EndFinishing Tools (Solid), Super Flange 11/2" and 2"
 EndFinishing Tools (Solid), Solid Die Flare 45 degree
 EndFinishing Tools (Solid), Solid Die Flare 90 degree


SUPER1207 DIE PACKAGE
 Bending Radius Die Pipe Diameter 11/2" Bend Radius 3"
 Bending Radius Die Pipe Diameter 13/4" Bend Radius 3"
 Bending Radius Die Pipe Diameter 13/4" Bend Radius 4"
 Bending Radius Die Pipe Diameter 2" Bend Radius 3"
 Bending Radius Die Pipe Diameter 2" Bend Radius 4"
 Bending Radius Die Pipe Diameter 2" Bend Radius 5"
 Bending Radius Die Pipe Diameter 21/4" Bend Radius 4"
 Bending Radius Die Pipe Diameter 21/4" Bend Radius 5"
 Bending Radius Die Pipe Diameter 21/2" Bend Radius 4"
 Bending Radius Die Pipe Diameter 21/2" Bend Radius 5"
 Bending Dies, Back Shoes (2) Pipe Diameter 11/2" Bend Radius 2"
 Bending Dies, Back Shoes (2) Pipe Diameter 13/4" Bend Radius 21/4"
 Bending Dies, Half Shoes Pipe Diameter 11/2" Bend Radius 2"
 Bending Dies, Half Shoes Pipe Diameter 13/4" Bend Radius 21/4"
 Bending Dies, Three Quarter Shoes (1) Pipe Diameter 2" Bend Radius 21/4"
 EndFinishing Tool (Segmented), Expander 11/2" to 15/8"
 EndFinishing Tool (Segmented), Expander 21/8" to 21/2"
 EndFinishing Tool (Segmented), Expander 13/4" to 21/2"
 EndFinishing Tool (Segmented), Buick Ball Tool 2"
 EndFinishing Tool (Segmented), Buick Ball Tool 21/2"
 EndFinishing Tool (Segmented), Buick Ball Tool 21/4"
 EndFinishing Tools (Solid), Collets (2 required) Pipe Diameter 11/2" Bend Radius 2"
 EndFinishing Tools (Solid), Swagers Pipe Diameter 11/2" Bend Radius 2"
 EndFinishing Tools (Solid), Swagers Pipe Diameter 13/4" Bend Radius 21/4"
 EndFinishing Tools (Solid), Female Ball Joint 13/4" and 2"
 EndFinishing Tools (Solid), Female Ball Joint 21/4" and 21/2"
 EndFinishing Tools (Solid), Super Flange 11/2" and 2"
 EndFinishing Tools (Solid), Solid Die Flare 45 degree
 EndFinishing Tools (Solid), Solid Die Flare 90 degree
 EndFinishing Tool (Segmented), Buick Ball Tool 2"
 EndFinishing Tool (Segmented), Buick Ball Tool 21/2"
 EndFinishing Tool (Segmented), Buick Ball Tool 21/4"
 EndFinishing Tools (Solid), Collets (2 required) Pipe Diameter 11/2" Bend Radius 2" EndFinishing Tools (Solid), Collets (2 required) Pipe Diameter 17/8" Bend Radius 21/2"
 EndFinishing Tools (Solid), Swagers Pipe Diameter 11/2" Bend Radius 2"
 EndFinishing Tools (Solid), Swagers Pipe Diameter 13/4" Bend Radius 21/4"
 EndFinishing Tools (Solid), Swagers Pipe Diameter 17/8" Bend Radius 21/2"
 EndFinishing Tools (Solid), Female Ball Joint 13/4" and 2"
 EndFinishing Tools (Solid), Female Ball Joint 21/4" and 21/2"
 EndFinishing Tools (Solid), Super Flange 11/2" and 2"
 EndFinishing Tools (Solid), Solid Die Flare 45 degree
 EndFinishing Tools (Solid), Solid Die Flare 90 degree




SUPER120 DIE PACKAGE
 Bending Radius Die Pipe Diameter 11/2" Bend Radius 3"
 Bending Radius Die Pipe Diameter 13/4" Bend Radius 3"
 Bending Radius Die Pipe Diameter 13/4" Bend Radius 4"
 Bending Radius Die Pipe Diameter 17/8" Bend Radius 4"
 Bending Radius Die Pipe Diameter 2" Bend Radius 3"
 Bending Radius Die Pipe Diameter 2" Bend Radius 4"
 Bending Radius Die Pipe Diameter 2" Bend Radius 5"
 Bending Radius Die Pipe Diameter 21/4" Bend Radius 4"
 Bending Radius Die Pipe Diameter 21/4" Bend Radius 5"
 Bending Radius Die Pipe Diameter 21/2" Bend Radius 4"
 Bending Radius Die Pipe Diameter 21/2" Bend Radius 5"
 Bending Dies, Back Shoes (2) Pipe Diameter 11/2" Bend Radius 2"
 Bending Dies, Back Shoes (2) Pipe Diameter 13/4" Bend Radius 21/4"
 Bending Dies, Back Shoes (2) Pipe Diameter 17/8" Bend Radius 21/2"
 Bending Dies, Half Shoes Pipe Diameter 11/2" Bend Radius 2"
 Bending Dies, Half Shoes Pipe Diameter 13/4" Bend Radius 21/4"
 Bending Dies, Half Shoes Pipe Diameter 17/8" Bend Radius 21/2"
 Bending Dies, Three Quarter Shoes (1) Pipe Diameter 2" Bend Radius 21/4"
 EndFinishing Tool (Segmented), Expander 11/2" to 15/8"
 EndFinishing Tool (Segmented), Expander 21/8" to 21/2"
 EndFinishing Tool (Segmented), Expander 13/4" to 21/2"




SUPER110 DIE PACKAGE
 Bending Radius Die Pipe Diameter 11/2" Bend Radius 3"
 Bending Radius Die Pipe Diameter 13/4" Bend Radius 3"
 Bending Radius Die Pipe Diameter 2" Bend Radius 4"
 Bending Radius Die Pipe Diameter 2" Bend Radius 5"
 Bending Radius Die Pipe Diameter 21/4" Bend Radius 4"
 Bending Radius Die Pipe Diameter 21/4" Bend Radius 5"
 Bending Radius Die Pipe Diameter 21/2" Bend Radius 5"
 Bending Radius Die Pipe Diameter 3" Bend Radius 5"
 Bending Dies, Back Shoes (2) Pipe Diameter 11/2" Bend Radius 1"
 Bending Dies, Back Shoes (2) Pipe Diameter 13/4" Bend Radius 1"
 Bending Dies, Back Shoes (2) Pipe Diameter 2" Bend Radius 1"
 Bending Dies, Back Shoes (2) Pipe Diameter 21/4" Bend Radius 1"
 Bending Dies, Back Shoes (2) Pipe Diameter 21/2" Bend Radius 1"
 Bending Dies, Back Shoes (2) Pipe Diameter 3" Bend Radius 1"
 Bending Dies, Half Shoes Pipe Diameter 11/2" Bend Radius 2"
 Bending Dies, Half Shoes Pipe Diameter 13/4" Bend Radius 21/4"
 Bending Dies, Half Shoes Pipe Diameter 17/8" Bend Radius 21/2"
 Bending Dies, Three Quarter Shoes (1) Pipe Diameter 2" Bend Radius 21/4"
 EndFinishing Tool (Segmented), Expander 11/2" to 15/8"
 EndFinishing Tool (Segmented), Expander 21/8" to 21/2"
 EndFinishing Tool (Segmented), Expander 13/4" to 2"
 EndFinishing Tool (Segmented), Expander 25/8" to 3"
 EndFinishing Tools (Solid), Collets (2 required) Pipe Diameter 11/2" Bend Radius 2"
 EndFinishing Tools (Solid), Collets (2 required) Pipe Diameter 13/4"
 EndFinishing Tools (Solid), Collets (2 required) Pipe Diameter 2"
 EndFinishing Tools (Solid), Collets (2 required) Pipe Diameter 21/4"
 EndFinishing Tools (Solid), Collets (2 required) Pipe Diameter 21/2"
 EndFinishing Tools (Solid), Swagers Pipe Diameter 11/2"
 EndFinishing Tools (Solid), Swagers Pipe Diameter 13/4"
 EndFinishing Tools (Solid), Swagers Pipe Diameter 2"
 EndFinishing Tools (Solid), Female Ball Joint 13/4" and 2"
 EndFinishing Tools (Solid), Female Ball Joint 21/4" and 21/2"
 EndFinishing Tools (Solid), Solid Die Flare 45 degree
 EndFinishing Tools (Solid), Solid Die Flare 90 degree
 O'Ring Kit
 Cylinder Adapter




SUPER80 DIE PACKAGE
 Bending Radius Dies Pipe Diameter 11/2" Bend Radius 3"
 Bending Radius Dies Pipe Diameter 13/4" Bend Radius 4"
 Bending Radius Dies Pipe Diameter 2" Bend Radius 3"
 Bending Radius Dies Pipe Diameter 2" Bend Radius 4"
 Bending Radius Dies Pipe Diameter 2" Bend Radius 5"
 Bending Radius Dies Pipe Diameter 21/4" Bend Radius 4"
 Bending Radius Dies Pipe Diameter 21/4" Bend Radius 5"
 Bending Radius Dies Pipe Diameter 21/2" Bend Radius 5"
 Bending Dies, Back Shoes (2) Pipe Diameter 11/2" Bend Radius 21/4"
 Bending Dies, Back Shoes (2) Pipe Diameter 13/4" Bend Radius 21/2"
 Bending Dies, Half Shoes Pipe Diameter 11/2" Bend Radius 21/4"
 Bending Dies, Half Shoes Pipe Diameter 13/4" Bend Radius 21/2"
 Bending Dies, Half Shoes Pipe Diameter 2"
 EndFinishing Tools (Segmented), Expanders 11/2" to 15/8"
 EndFinishing Tools (Segmented), Expanders 13/4" to 2"
 EndFinishing Tools (Segmented), Expanders 11/8" to 21/2"
 EndFinishing Tools (Solid), Collets (2 required) Pipe Diameter 11/2" Bend Radius 21/4"
 EndFinishing Tools (Solid), Collets (2 required) Pipe Diameter 13/4" Bend Radius 21/2"
 EndFinishing Tools (Solid), Collets (2 required) Pipe Diameter 2"
 EndFinishing Tools (Solid), Swagers Pipe Diameter 11/2" Bend Radius 21/4"
 EndFinishing Tools (Solid), Swagers Pipe Diameter 13/4" Bend Radius 21/2"
 EndFinishing Tools (Solid), Swagers Pipe Diameter 2"
 EndFinishing Tools (Solid), Solid Die Flare 45 degree
 EndFinishing Tools (Solid), Solid Die Flare 90 degree










































































